QUANTiC™ encoder series
The QUANTiC encoder system integrates Renishaw's filtering optics design and interpolation technology to create a super-compact, robust, incremental open optical encoder. QUANTiC encoders are easy to use with exceptionally wide installation and operation tolerances, along with built-in calibration functions.
QUANTiC readheads offer digital output and a new analogue output variant with a wide variety of configurations and linear or rotary scale options.
Detailed diagnostic information can be accessed by using the Advanced Diagnostic Tool ADTi‑100 and ADT View software during installation or for in-field diagnostics and fault finding.
Robust position measurement over contamination
![Reliability pictogram](/media/img/gen/fe203a590b5f4c2899bdb8a386e04d1d.png)
QUANTiC readheads ensure excellent motion control performance in a wide range of applications by minimising positional error over scale contamination. A new detector design provides an additional layer of signal filtering which helps to eliminate non-harmonic signal frequencies, ensuring low Sub-Divisional Error (SDE) and minimal signal variation over dirt or contamination on the scale.
Easy installation and set-up
![Easy installation pictogram](/media/img/gen/c1b8283a87b74eb8b463412034127cc1.png)
The advanced optical design and signal processing of the QUANTiC encoder provides increased installation and operational tolerances whilst maintaining metrological performance. Low cost of ownership is achieved through reduced installation and set-up times.
Speed
![Decorative image representing speed](/media/img/gen/75c294e78ffa483bb5fb1d22aa5ab628.png)
Speeds up to 24 m/s can be achieved to meet the most demanding motion control requirements.
Clocked output option (MHz) | Maximum speed (m/s) | Minimum edge separation* (ns) | ||||||
T (10 µm) | D (5 µm) | X (1 µm) | Z (0.5 µm) | W (0.2 µm) | Y (0.1 µm) | H (50 nm) | ||
50 | 24 | 24 | 24 | 18.13 | 7.25 | 3.626 | 1.813 | 25.1 |
40 | 24 | 24 | 24 | 14.50 | 5.80 | 2.900 | 1.450 | 31.6 |
25 | 24 | 24 | 18.13 | 9.06 | 3.63 | 1.813 | 0.906 | 51.0 |
20 | 24 | 24 | 16.11 | 8.06 | 3.22 | 1.611 | 0.806 | 57.5 |
12 | 24 | 24 | 10.36 | 5.18 | 2.07 | 1.036 | 0.518 | 90.0 |
10 | 24 | 24 | 8.53 | 4.27 | 1.71 | 0.853 | 0.427 | 109 |
08 | 24 | 24 | 6.91 | 3.45 | 1.38 | 0.691 | 0.345 | 135 |
06 | 24 | 24 | 5.37 | 2.69 | 1.07 | 0.537 | 0.269 | 174 |
04 | 24 | 18.13 | 3.63 | 1.81 | 0.73 | 0.363 | 0.181 | 259 |
01 | 9.06 | 4.53 | 0.91 | 0.45 | 0.18 | 0.091 | 0.045 | 1038 |
Analogue output | 20 (-3dB) |
Find your QUANTiC scale option
Linear
Scale type | Scale name | Accuracy | Scale pitch | Coefficient of thermal expansion at 20 °C | Scale max length |
Stainless steel tape with track option | RTLC40 with optional FASTRACK™ | 40 µm (high accuracy): ±5 µm/m | 40 µm | 10.1 ±0.2 µm/m/°C | 10 m (> 10 m on request) |
Narrow stainless steel tape scale | 40 µm (high accuracy): ±5 µm/m 40 µm: ±15 µm/m | 40 µm | Matched to substrate material when scale ends are fixed with end clamps | 20 m (> 20 m on request) |
Partial arc
Scale type | Scale name | Accuracy | Scale pitch | Coefficient of thermal expansion at 20 °C | Scale max length |
Narrow stainless steel partial arc scale | 40 µm: ±15 µm/m | 40 µm | 10.1 ±0.2 μm/m/°C | 20 m (> 20 m on request) |
Rotary
Scale type | Scale name | Graduation accuracy (depending on ring diameter) | Scale pitch | Coefficient of thermal expansion at 20 °C | Ring diameter |
Stainless steel ring ![]() |
| ±3.97 to ±0.38 arc seconds | 40 µm | 15.5 ±0.5 µm/m/ °C | 52 to 550 mm |
Optional Advanced Diagnostic Tool ADTi-100
![Advanced Diagnostic Tool ADTi-100](/media/img/gen/98a7775f1093472a8d01082659bdf2f7.jpg)
The QUANTiC encoder system is compatible with the Advanced Diagnostic Tool ADTi-100 and ADT View software. They provide comprehensive real-time encoder data feedback to aid more challenging installations and diagnostics. The intuitive software interface can be used for:
- Remote calibration
- Signal optimisation over the entire axis length
- Readhead pitch indication
- Limit and reference mark indication
- Readout of encoder position (relative to the scale)
- Monitoring the velocity against time graph
- Exporting and saving data